The Castair 8TT150NC Complete Portable Kit is the 8TT150N twin tank air receiver packaged with everything you need to build a mobile compressor: wheels, axle, handle, vibration pads, and belt guard included. At $329.41, it saves approximately 15% compared to buying the tank and accessories separately. If you are building or rebuilding a portable compressor and do not already have the mobility hardware, the NC kit is the straightforward choice.
The tank itself is the same 8TT150N receiver: 8-gallon total capacity across two tanks, 17x34" footprint, 9x24" top plate for pump/motor mounting, 150 PSI maximum working pressure, 68 lbs empty. Non-code (non-ASME) receiver, which is the correct designation for portable and contractor-class equipment. Castair builds these in Minnesota with cast iron — heavier and more durable than the sheet-steel tanks common on consumer and light-duty compressors.
What the "NC" kit adds beyond the tank: wheels and axle for rolling mobility, a handle for control and maneuvering, vibration pads to isolate pump vibration from the tank and frame, and a belt guard for safety and compliance when running a belt-driven pump. These are not afterthoughts — a portable compressor without vibration isolation will develop loose fittings and stress cracks faster, and a belt-driven pump without a guard is a maintenance and liability issue. The kit includes them at a price below what you would pay sourcing them one at a time.
Key Features
- Complete kit configuration: Tank plus wheels, axle, handle, vibration pads, and belt guard — everything to build a mobile compressor platform except the pump and motor
- 15% savings vs. individual components: At $329.41, the kit price is approximately 15% below buying the 8TT150N tank and mobility accessories separately
- 8-gallon twin tank receiver: 8-gallon total capacity, 17x34" footprint, 9x24" top plate — same confirmed specs as the standalone 8TT150N
- 150 PSI working pressure: Rated for the full range of standard shop air tools — impacts, ratchets, tire inflation, blow guns, and moderate-duty continuous use
- Wheels and axle: Genuine rolling mobility — move the compressor around the shop or on a job site without lifting it
- Handle: Control and balance point for moving the unit — proper handles matter when you are moving a loaded compressor across uneven surfaces
- Vibration pads: Isolate pump vibration from the tank and frame — extends service life of fittings, gauges, and the tank itself; reduces noise in operation
- Belt guard: Safety and compliance for belt-driven pump configurations — required in most commercial environments, included here rather than sourced separately
- Cast iron construction: Castair uses cast iron throughout — longer service life than sheet-steel consumer units, holds up to the vibration and thermal cycling of daily commercial use
- Non-code (non-ASME) receiver: Correct designation for portable and contractor-class compressors — if you need ASME certification, that is a different product category
- Minnesota manufactured: Domestic production, custom builds available, direct manufacturer support through us
What's in the Box
- Castair 8TT150N twin tank air receiver (8-gallon, 150 PSI, 17x34" footprint)
- Wheel set (two wheels)
- Axle
- Handle assembly
- Vibration pad set
- Belt guard
- Not included: pump assembly, motor (electric or gas engine), air fittings, pressure switch, regulator — these are sourced separately based on your drive configuration
Available Configurations
- 8TT150NC (this unit) — Complete kit: 8TT150N tank plus wheels, axle, handle, vibration pads, belt guard. $329.41. Best value if you need the full mobility package.
- 8TT150N — Tank receiver only: Same tank, no kit accessories. Order this if you already have wheels, handle, and pads from a previous compressor or are building into a fixed frame. Contact us for pricing.
- 8TT150G — Gas designation tank: Same core tank, gas-engine build designation, tank only. Contact us for pricing.
When Does a Shop Need This vs. Stepping Up or Down
- Buy the 8TT150NC if: You are building a new portable compressor from the tank up and do not have wheels, handle, and vibration hardware on hand. The 15% kit savings versus piece-sourcing is real, and having the matched components from the same manufacturer simplifies the build.
- Choose the 8TT150N instead if: You already have mobility hardware from a previous compressor that fits this tank footprint — no point paying for parts you do not need.
- Step up if: You need an ASME-coded receiver for a regulated or fixed-installation environment, or you need more than 8 gallons of capacity for high-demand sustained tool use (sandblasting, production air tools, paint booths).
- Step down if: Your use is genuinely occasional or light-duty — there are smaller, lighter portable receivers that will serve intermittent shop use at lower cost.
- Gas vs. electric pump: The tank is the same regardless of your drive choice. The 8TT150NC kit accepts either a gas engine or electric motor pump assembly. Tell us your intended drive and we can confirm compatibility.
Technical Specifications
- Part Number: 8TT150NC
- Tank Capacity: 8 gallons (twin tank configuration)
- Maximum Working Pressure: 150 PSI
- Tank Footprint: 17" x 34"
- Top Plate: 9" x 24"
- Empty Weight (tank only): 68 lbs (add wheels, axle, handle for assembled weight)
- Code Rating: Non-Code (non-ASME) air receiver
- Kit Includes: Tank, wheels, axle, handle, vibration pads, belt guard
- Price: $329.41
- Savings vs. Individual Components: Approximately 15%
- Manufacturer: Castair (Cast Air Manufacturing), Minnesota
Frequently Asked Questions
- Does the kit include a pump or motor? No. The 8TT150NC provides the tank and mobility hardware. Pump and motor/engine are sourced separately based on your drive configuration (electric or gas).
- What pump and motor are compatible? Call us at 866-217-0063 and tell us your intended CFM and pressure requirements. We can match you with the right Castair or compatible pump package for this tank.
- Is this ASME coded? No. The 8TT150NC is a non-code (non-ASME) receiver, which is standard for portable compressor applications. If your jurisdiction or application requires ASME certification, contact us before ordering.
- Can this be used with a gas engine? Yes. The tank accepts either a gas-engine or electric-motor pump assembly. The 8TT150G is the gas-specific designation for the same tank if that matters for your application.
Why Buy From Air Compressor Factory Direct?
We have been selling Castair equipment since 2016. We know this product line and we stock it. The 8TT150NC is one of the most practical entry points for building a portable commercial compressor — the kit saves you money and gives you matched components from the manufacturer. We can help you select the pump and motor to complete the build, confirm fitment for your specific application, and answer questions on installation. Free shipping on qualifying orders, full manufacturer warranty, and direct support before and after the sale.
Call 866-217-0063 for quick answers and help!
