{"product_id":"castair-replacement-wheel-10x2x1-2-w10x1-5x-5","title":"Castair Replacement Wheel 10X2X1\/2\" W10x1.5x.5","description":"\u003cp\u003eThe Castair W10x1.5x.5 is a replacement wheel for Castair air compressor units — 10\" outer diameter, 2\" wide tread, 1\/2\" axle bore. This is the right wheel when a compressor's existing wheel is damaged, worn through, or when you're reconditioning a used Castair unit to return it to mobile service. The 1\/2\" bore fits standard 1\/2\" axle rod, and the 10\" diameter gives a compressor adequate ground clearance and rollability on typical shop and garage floors.\u003c\/p\u003e\n\n\u003ch2\u003eWhen You Need This Wheel\u003c\/h2\u003e\n\u003cp\u003eCompressor wheels get damaged in predictable ways: the rubber tread wears flat from years of dragging rather than rolling, the plastic hub cracks from impact or overloading, or the bearing inside seizes from lack of lubrication and the wheel stops rolling entirely. Any of these conditions turns a mobile compressor into a fixed installation — which is fine if that's what you want, but not if you need the unit to move. The W10x1.5x.5 is a $15.40 fix that restores full mobility.\u003c\/p\u003e\n\u003cp\u003eThis wheel is also useful when reconditioning a used Castair compressor purchased at auction or second-hand. Used units often have damaged wheels from previous operators — replacing both wheels brings the unit back to presentable, functional condition.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTread Width:\u003c\/strong\u003e 2 inches (listed as 10X2X1\/2 in the product name)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Bore:\u003c\/strong\u003e 1\/2 inch — fits 1\/2\" axle rod\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Castair portable and semi-portable air compressor units with 10\" wheel specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Castair Part:\u003c\/strong\u003e Factory-specification replacement wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW10x1.5x.5 vs. W10x3x.75\u003c\/h2\u003e\n\u003cp\u003eCastair offers two wheel sizes in this lineup. The choice between them depends on your compressor's original wheel spec:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eW10x1.5x.5\u003c\/strong\u003e ($15.40) — 10\" OD x 2\" wide x 1\/2\" bore — narrower tread, smaller axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW10x3x.75\u003c\/strong\u003e ($33.88) — 10\" OD x 3\" wide x 3\/4\" bore — wider tread, larger axle bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMatch the replacement to your original wheel dimensions. Measure the axle rod diameter before ordering — installing a 1\/2\" bore wheel on a 3\/4\" axle requires a bushing, and installing a 3\/4\" bore wheel on a 1\/2\" axle is loose and unsafe. When in doubt, measure.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRelieve all tank pressure and disconnect from power before any work near the tank or frame\u003c\/li\u003e\n\u003cli\u003eNote axle retention method before disassembly — some axles use roll pins, others use cotter pins or snap rings\u003c\/li\u003e\n\u003cli\u003eInspect the axle rod for wear, bending, or corrosion while the wheel is off — a bent axle will wear out the new wheel prematurely\u003c\/li\u003e\n\u003cli\u003eLubricate the axle bore lightly before installation if the wheel uses a plain bearing (no sealed bearing)\u003c\/li\u003e\n\u003cli\u003eReinstall the axle retention hardware securely — a loose wheel on a compressor being rolled is a safety hazard\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Castair W10x1.5x.5 Replacement Wheel — 10\" OD x 2\" wide x 1\/2\" bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eAxle retention hardware and mounting hardware are not confirmed to be included. Verify what hardware is needed for your compressor's wheel mounting before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e W10x1.5x.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Cast Air \/ Castair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTread Width:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Bore:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Major Components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e $15.40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eLoad rating and tread material were not confirmed from manufacturer data at time of writing.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhy Buy From Air Compressor Factory Direct?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCastair Parts Specialist:\u003c\/strong\u003e We stock Castair replacement wheels in both the 1\/2\" and 3\/4\" bore versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Shipping:\u003c\/strong\u003e On qualifying orders to the contiguous US\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Tech Support:\u003c\/strong\u003e Call 866-217-0063 to confirm the correct wheel size for your compressor before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Parts:\u003c\/strong\u003e Factory-specification Castair replacement components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Manufacturer Warranty:\u003c\/strong\u003e Backed by Castair's standard product warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCall 866-217-0063 for quick answers and help!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cast Air","offers":[{"title":"Default Title","offer_id":53342611112149,"sku":"W10x1.5x.5","price":28.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0622\/8466\/0949\/files\/360_F_473254957_bxG9yf4ly7OBO5I0O5KABlN930GwaMQz_f829b1bd-5e42-4c0d-b3ac-986cb154d4d7.jpg?v=1772652971","url":"https:\/\/aircompressorfactorydirect.com\/products\/castair-replacement-wheel-10x2x1-2-w10x1-5x-5","provider":"Air Compressor Factory Direct","version":"1.0","type":"link"}