{"product_id":"castair-rd25-6k-refrigerated-air-dryer-115-1-60v-25cfm-37degf-3-4npt-in-out-connections-rd25-6k","title":"Castair RD25-6K Refrigerated Air Dryer 115\/1\/60V 25CFM@37degF 3\/4\"NPT In\/Out Connections RD25-6K","description":"\u003cp\u003eThe Castair RD25-6K is a refrigerated compressed air dryer rated at 25 CFM at a 37°F pressure dew point. It is designed for small to mid-size shops running a single compressor in the 5–10 HP range — paint booths, body shops, production lines, or any shop where moisture-sensitive tools and equipment require consistently dry air. If you are dealing with water in your air lines, spitting from spray guns, or premature failure of pneumatic tools, this dryer solves the problem permanently.\u003c\/p\u003e\n\n\u003cp\u003eRefrigerated dryers are the industry standard for removing moisture from compressed air. The RD25-6K uses environmentally friendly refrigerant (R134a or R407c) to chill the compressed air to a 37°F dew point. At that temperature, water vapor condenses into liquid droplets and gets ejected through the automatic drain — before it ever reaches your tools, paint guns, or pneumatic cylinders.\u003c\/p\u003e\n\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigeration cycle:\u003c\/strong\u003e Compressed air passes through a stainless steel heat exchanger. Freon refrigerant absorbs the heat, dropping the air temperature and condensing the moisture out of suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-function heat exchanger:\u003c\/strong\u003e The single-body design pre-cools incoming hot air with outgoing cold air, improving efficiency and reducing refrigerant load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic drain:\u003c\/strong\u003e The onboard drain only cycles when water is present — it does not waste compressed air by draining on a fixed timer. Less compressed air lost means lower operating costs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDew point indicator:\u003c\/strong\u003e Simple visual indicator confirms the dryer is maintaining proper dew point without requiring any programming or computer logic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity:\u003c\/strong\u003e 25 CFM at 37°F dew point (28 CFM at 50°F dew point)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet\/outlet connections:\u003c\/strong\u003e 3\/4\" NPT — matches directly to most single-stage and two-stage piston compressors in the 5–10 HP class\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115V \/ 1-phase \/ 60Hz with 9-foot three-prong power cord — plugs into standard shop outlet, no special wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 3.0 amps — minimal electrical load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R134a \/ R407c (environmentally friendly, not R22)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum inlet pressure:\u003c\/strong\u003e 232 psig — well above standard shop compressor pressures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat exchanger material:\u003c\/strong\u003e Stainless steel for corrosion resistance and long service life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick connect:\u003c\/strong\u003e Refrigerant recharge port for field service without disassembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 57 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×D×H):\u003c\/strong\u003e 10.6\" × 17.9\" × 19.6\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Moisture in Compressed Air Is a Real Cost Problem\u003c\/h2\u003e\n\u003cp\u003eUntreated compressed air carries water vapor — the amount depends on ambient humidity and the temperature the air is compressed to. As the air cools downstream, that vapor condenses into liquid water inside your lines, tanks, and tools. The results are visible: rust in air lines, spitting spray guns, air tools that fail early, and corrosion in pneumatic cylinders and solenoids. According to Castair, adding a properly sized refrigerated dryer reduces overall air system maintenance costs and downtime by 15–25%. That is a real number across a busy shop.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCastair RD25-6K refrigerated air dryer unit\u003c\/li\u003e\n\u003cli\u003e9-foot three-prong 115V power cord (pre-installed)\u003c\/li\u003e\n\u003cli\u003eRefrigerant pre-charged at the factory (R134a\/R407c)\u003c\/li\u003e\n\u003cli\u003eInlet\/outlet 3\/4\" NPT connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: A properly sized pre-filter is required for warranty. The Castair C-FS34 or C-FM14 particulate filter is recommended upstream of the dryer. Vibration pads and flex hose are recommended for installation.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eAvailable Configurations \/ Upgrade Path\u003c\/h2\u003e\n\u003cp\u003eCastair offers a complete lineup of refrigerated dryers. All models run on 115V\/1-phase\/60Hz power and share the same refrigerant technology and automatic drain design. Here is where the RD25-6K fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRD25-6K — 25 CFM @ 37°F:\u003c\/strong\u003e This unit. For compressors in the 5–7.5 HP range producing up to 25 CFM. Single shop or single bay applications. 3\/4\" NPT connections, 57 lbs, 10.6\" × 17.9\" × 19.6\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRD59-11K — 59 CFM @ 37°F:\u003c\/strong\u003e Next step up. For compressors in the 10–15 HP range. Same 3\/4\" NPT connections, 73 lbs, slightly larger footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRD71-15K — 71 CFM @ 37°F:\u003c\/strong\u003e For 15–20 HP compressors. Upgrades to 1\" NPT connections, 110 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRD113-60K — 107 CFM @ 37°F:\u003c\/strong\u003e For 20–25 HP compressors. 1\" NPT, 119 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRD161-37K — 161 CFM @ 37°F:\u003c\/strong\u003e For larger systems. 1-1\/2\" NPT, 137 lbs.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLarger sizes available — call for pricing.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhen Does a Shop Need This vs. Stepping Up or Down\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe RD25-6K is right for your shop if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou have a compressor producing 25 CFM or less (typically 5–7.5 HP)\u003c\/li\u003e\n\u003cli\u003eYou have a single-bay paint booth, a body shop with one spray gun running at a time, or a small production line\u003c\/li\u003e\n\u003cli\u003eYou need 115V single-phase power — no three-phase electrical available\u003c\/li\u003e\n\u003cli\u003eSpace is limited — this is a compact unit at under 11\" wide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStep up to the RD59-11K if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYour compressor is 10 HP or larger and produces more than 25 CFM peak demand\u003c\/li\u003e\n\u003cli\u003eYou are running multiple tools simultaneously from the same compressor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity note:\u003c\/strong\u003e Dryer capacity ratings are based on 100°F inlet air temperature, 100°F ambient temperature, and 100 PSI operating pressure. If your air is hotter than 100°F at the dryer inlet (common with compressors without aftercoolers), actual capacity is reduced. At 150°F inlet air temperature, effective capacity drops to 55% of rated — meaning this dryer would handle approximately 14 CFM, not 25. An aftercooler upstream of the dryer is strongly recommended in high-temperature installations.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Options\u003c\/h2\u003e\n\u003cp\u003eCastair offers installation kits for mounting the dryer directly on the compressor:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e#DM75:\u003c\/strong\u003e Mount kit for RD59-11K or smaller — includes 3\/4\" NPT 3-ball valve bypass, metal flex hose, and vibration pads. Allows the dryer to be bypassed for service without shutting down the compressor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e RD25-6K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCFM @ 37°F dew point:\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCFM @ 50°F dew point:\u003c\/strong\u003e 28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet\/Outlet Connection:\u003c\/strong\u003e 3\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage \/ Phase \/ Hz:\u003c\/strong\u003e 115V \/ 1-phase \/ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 3.0 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R134a \/ R407c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Inlet Pressure:\u003c\/strong\u003e 232 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Dew Point:\u003c\/strong\u003e 37°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Exchanger:\u003c\/strong\u003e Stainless steel, dual-function single body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain Type:\u003c\/strong\u003e Automatic, cycles on demand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Cord:\u003c\/strong\u003e 9 ft, three-prong 115V plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 57 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×D×H):\u003c\/strong\u003e 10.6\" × 17.9\" × 19.6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL Listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity Rating Basis:\u003c\/strong\u003e 100°F inlet air, 100°F ambient, 100 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Buy From Air Compressor Factory Direct?\u003c\/h3\u003e\n\u003cp\u003eWe have been selling and supporting compressed air equipment since 2016 — not as a general industrial distributor, but as a specialist. When you call us, you talk to someone who can confirm whether the RD25-6K is right for your compressor or whether you need to step up to the RD59-11K. We offer free shipping on qualifying orders, free pre-sale technical support, and the full Castair manufacturer warranty. If you need installation guidance, filter sizing help, or want to talk through the full air treatment system for your shop, we are here for that conversation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCall 866-217-0063 for quick answers and help!\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Cast Air","offers":[{"title":"Default Title","offer_id":53342589812949,"sku":"RD25-6K","price":2734.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0622\/8466\/0949\/files\/REFRIGERATED-COMPRESSED-AIR-DRYERS-288x300.jpg?v=1772652865","url":"https:\/\/aircompressorfactorydirect.com\/products\/castair-rd25-6k-refrigerated-air-dryer-115-1-60v-25cfm-37degf-3-4npt-in-out-connections-rd25-6k","provider":"Air Compressor Factory Direct","version":"1.0","type":"link"}