{"product_id":"castair-c-ls10","title":"Castair C-LS10","description":"\u003ch2\u003eCastair C-LS10 — 1\" Air Line Lubricator, 250 PSI, 180 CFM\u003c\/h2\u003e\n\n\u003cp\u003eThe C-LS10 is a 1-inch NPT standard-size air line lubricator from Castair. It introduces a controlled mist of oil into the compressed air stream to lubricate downstream pneumatic tools and air-operated equipment that require continuous lubrication during operation. At 180 CFM and 250 PSI maximum inlet pressure, it is sized for the largest air lines in industrial and commercial shop installations.\u003c\/p\u003e\n\n\u003cp\u003eNot all pneumatic equipment needs in-line lubrication — modern air tools, cylinders with pre-lubricated seals, and many production components run better on clean, dry, oil-free air. Before installing a lubricator, confirm that your downstream equipment is designed for lubricated air. For equipment that does require it, the C-LS10 on a 1-inch main or branch line keeps moving parts properly protected.\u003c\/p\u003e\n\n\u003ch3\u003eWhat This Unit Does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled Oil Mist Injection:\u003c\/strong\u003e Meters a fine oil mist into the air stream. The feed rate is adjustable to match the lubrication requirements of the downstream equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 oz Oil Reservoir:\u003c\/strong\u003e Holds enough oil for extended operation between refills. Check and refill the reservoir on a scheduled basis — running dry defeats the purpose of in-line lubrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" NPT Female Connections:\u003c\/strong\u003e Standard threading — fits directly to 1-inch pipe or fittings without adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 PSI Max \/ 180 CFM:\u003c\/strong\u003e Handles full-flow conditions on large industrial and commercial compressor outputs on a 1-inch main line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere It Fits in the Air System\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall after filtration and pressure regulation — the lubricator is the last component before the air reaches your tools. Sequence: filter → regulator → lubricator.\u003c\/li\u003e\n\u003cli\u003eDo not install a lubricator upstream of equipment that requires oil-free air. Pneumatic cylinders with internal lubrication, spray guns, breathing air systems, and many production tools are damaged or compromised by oil contamination.\u003c\/li\u003e\n\u003cli\u003eIn a shop running mixed equipment — some requiring lubrication, some requiring clean air — install lubricators only at the drops feeding lubrication-dependent tools rather than on the main line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCastair Lubricator Lineup\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-LS14 (1\/4\" Mini):\u003c\/strong\u003e 150 PSI max, 38 CFM, 1.5 oz bowl — light-duty drops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-LS12 (1\/2\" Std.):\u003c\/strong\u003e 250 PSI max, 105 CFM, 8.5 oz bowl — most shop and small commercial installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-LS34 (3\/4\" Std.):\u003c\/strong\u003e 250 PSI max, 160 CFM, 11 oz bowl — larger shops on 3\/4-inch lines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-LS10 (1\" Std.):\u003c\/strong\u003e 250 PSI max, 180 CFM, 11 oz bowl — high-output main lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e C-LS10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size:\u003c\/strong\u003e 1\" NPT Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e NPT Female Inlet and Outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Inlet Pressure:\u003c\/strong\u003e 250 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rating:\u003c\/strong\u003e 180 CFM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowl\/Reservoir Capacity:\u003c\/strong\u003e 11 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Castair, Spicer, Minnesota\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Buy From Air Compressor Factory Direct?\u003c\/h3\u003e\n\u003cp\u003eWe have sold Castair components since 2016 and carry their complete FRL lineup — filters, regulators, and lubricators in all standard sizes. Call 866-217-0063 and we will help you spec out the right components for your system. Free shipping on qualifying orders, full manufacturer warranty, free technical support.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCall 866-217-0063 for quick answers and help!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cast Air","offers":[{"title":"Default Title","offer_id":53342526144725,"sku":"C-LS10","price":261.28,"currency_code":"USD","in_stock":true}],"url":"https:\/\/aircompressorfactorydirect.com\/products\/castair-c-ls10","provider":"Air Compressor Factory Direct","version":"1.0","type":"link"}