{"product_id":"castair-8-gal-portable-air-receiver-tank-150psi-discharge-w-casters-8p150dc","title":"Castair 8 Gal Portable Air Receiver Tank 150PSI Discharge w\/ Casters - 8P150DC","description":"\u003ch2\u003eCastair 8P150DC — 8 Gallon Direct Drive Portable Compressor Complete Kit with Casters, 150 PSI\u003c\/h2\u003e\n\n\u003cp\u003eThe Castair 8P150DC is the complete portable air compressor assembly kit for direct drive units — everything you need to turn a bare pump-and-motor combination into a finished, rolling portable compressor. The kit includes the 8-gallon direct drive tank (8P150D), wheels, axle, handle, vibration pads, and belt guard. Buying the kit saves approximately 15% compared to sourcing each component separately, and everything is matched to fit without modification.\u003c\/p\u003e\n\n\u003cp\u003eIf you are building a new direct drive portable compressor from scratch, this is the right starting point. If you already have some of the hardware, the tank-only 8P150D is available separately.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is Included in the 8P150DC Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8P150D Tank:\u003c\/strong\u003e 8-gallon direct drive portable air receiver, 10\" x 24\", 6x7\" top plate, 150 PSI rated, 30 lbs (base tank)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheels with Casters:\u003c\/strong\u003e Matched wheels for the 8-gallon portable frame — allows the assembled unit to roll on job sites, in the shop, or in a truck bed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Sized for the 8-gallon portable (1\/2\" axle bolt, part AB12 individually)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e Portable carry\/push handle for the 8-gallon form factor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration Pads:\u003c\/strong\u003e Isolate the pump and motor from the tank frame, reducing vibration-related wear and noise during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt Guard:\u003c\/strong\u003e Safety guard for the belt\/pulley area on belt-adjacent configurations — included in the kit for complete assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTank Specifications (Base Unit)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 8P150DC (complete kit) \/ 8P150D (tank only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 8 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Dimensions:\u003c\/strong\u003e 10\" diameter x 24\" length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Plate:\u003c\/strong\u003e 6\" x 7\" — direct drive (DD) configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure:\u003c\/strong\u003e 150 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Weight:\u003c\/strong\u003e 30 lbs (assembled unit weight will vary based on pump and motor added)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASME Code:\u003c\/strong\u003e Non-code\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDirect Drive Configuration — What That Means for Your Build\u003c\/h3\u003e\n\u003cp\u003eThe 8P150DC kit is designed for direct drive compressor assemblies. In a direct drive setup, the motor shaft couples directly to the compressor pump crank — there is no belt, no pulley, and the motor mounts directly over the pump on the 6x7\" top plate. The advantages of direct drive in a portable configuration are simplicity and compact size. Fewer moving parts, lighter weight per cubic inch of displacement, and a smaller overall footprint.\u003c\/p\u003e\n\n\u003cp\u003eThe tradeoff versus belt drive is operating speed — direct drive runs the pump at full motor RPM, which means higher heat generation and, over time, slightly faster wear than a belt drive unit running the pump at reduced RPM. For portable use where the compressor is not running eight hours a day, that distinction matters less than for a shop compressor in continuous service.\u003c\/p\u003e\n\n\u003cp\u003eIf you are building a belt drive portable, you want the 8P150BC complete kit instead. The belt drive kit includes the 8P150B tank with the 6x16\" top plate required for belt drive motor-pump spacing.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Buy the Complete Kit Instead of the Tank Alone\u003c\/h3\u003e\n\u003cp\u003eThe 15% kit savings is the primary financial argument. But there is also a practical argument: when you order the 8P150DC, Cast Air matches the wheels, axle, handle, and hardware to the 8-gallon portable frame. You are not hunting for a wheel bore that fits a 1\/2\" axle, or sourcing a handle that clears the tank fittings. Everything is dimensionally correct for this specific tank before it ships.\u003c\/p\u003e\n\n\u003cp\u003eFor first-time builds or shops that want a clean parts list, the kit is the lower-friction option. For experienced compressor builders replacing a single failed component, the individual parts are available — tank (8P150D), wheels (W7.5x1.5x.5, W10x1.5x.5, or W10x3x.75 depending on preference), axle bolt (AB12), handle (3432013).\u003c\/p\u003e\n\n\u003ch3\u003e8 Gallon Portable: Right Application, Wrong Application\u003c\/h3\u003e\n\u003cp\u003eEight gallons is the right choice for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish and framing nailer work — intermittent tool use with recovery time between shots\u003c\/li\u003e\n\u003cli\u003eTire inflation, blow guns, and light air tool use\u003c\/li\u003e\n\u003cli\u003eJob site portability where the compressor needs to move between locations daily\u003c\/li\u003e\n\u003cli\u003eTruck bed or van cargo area storage where a larger tank is impractical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEight gallons is not the right choice for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSustained high-CFM tools — impact wrenches, die grinders, sand blasters — the compressor will cycle continuously and run hot\u003c\/li\u003e\n\u003cli\u003eMulti-tool air supply in a busy shop — a stationary 60-gallon or larger unit handles that load better\u003c\/li\u003e\n\u003cli\u003eApplications where a duty cycle over 50% is expected regularly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are building a portable for dedicated shop duty, Cast Air also offers a 20-gallon portable in the 20P150C complete kit. More storage buffer without going to a stationary unit.\u003c\/p\u003e\n\n\u003ch3\u003eManufacturer Background\u003c\/h3\u003e\n\u003cp\u003eCast Air is a Minnesota manufacturer specializing in cast iron, oil-lubricated air compressor components. Their tanks, pumps, and accessories are built for the independent shop and industrial market — not the consumer hardware store. Components are sized, drilled, and rated for actual compressor service rather than display specifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Buy From Air Compressor Factory Direct?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialist supplier:\u003c\/strong\u003e We stock Cast Air OEM complete kits and individual components. What you order is what ships — no substitutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e on qualifying orders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree technical support:\u003c\/strong\u003e Call 866-217-0063. If you are not sure whether the 8P150DC direct drive kit or the 8P150BC belt drive kit is correct for your build, call us before ordering. Getting the drive type right before the tank ships saves a return trip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull manufacturer warranty\u003c\/strong\u003e on all Cast Air tanks and components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonest guidance:\u003c\/strong\u003e If the 8-gallon is not enough for your application, we will tell you what Cast Air makes in the larger sizes and what the cost difference looks like.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCall 866-217-0063 for quick answers and help!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cast Air","offers":[{"title":"Default Title","offer_id":53342511988949,"sku":"8P150DC","price":254.18,"currency_code":"USD","in_stock":true}],"url":"https:\/\/aircompressorfactorydirect.com\/products\/castair-8-gal-portable-air-receiver-tank-150psi-discharge-w-casters-8p150dc","provider":"Air Compressor Factory Direct","version":"1.0","type":"link"}