{"product_id":"castair-30-gallon-horizontal-air-receiver-tank-200psi-30gh200","title":"Castair 30 Gallon Horizontal Air Receiver Tank 200PSI 30GH200","description":"\u003ch2\u003eCastair 30 Gallon Horizontal Air Receiver Tank — 200 PSI (30GH200)\u003c\/h2\u003e\n\u003cp\u003eThe Castair 30GH200 is a 30-gallon horizontal air receiver tank rated to 200 PSI maximum allowable working pressure (MAWP). Horizontal receivers are the right choice when floor space is limited but ceiling height is not. At 30 gallons and 200 PSI, this tank stores enough compressed air to buffer demand peaks in small shop systems while keeping pressure at tools consistent during compressor off-cycles. The 200 PSI rating gives you headroom above most shop compressor cut-out pressures (typically 125-175 PSI), which means the tank can be used with virtually any reciprocating compressor in this size class.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eManufacturer page data was not available for this listing. Specifications are drawn from the product name, part number, and standard air receiver specifications. Call 866-217-0063 to confirm dimensions and connection specs before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eWhy a Horizontal Receiver?\u003c\/h2\u003e\n\u003ch3\u003eHorizontal vs. Vertical Receiver Tanks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal layout:\u003c\/strong\u003e Lower profile — better suited for spaces with limited ceiling height, or when the tank needs to be mounted on a shelf, platform, or under a workbench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStability:\u003c\/strong\u003e Horizontal tanks have a lower center of gravity and do not require bracing or anchoring to the same degree as tall vertical tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor base mounting:\u003c\/strong\u003e Many horizontal receivers are designed to mount under a piston compressor pump\/motor assembly, creating a compact horizontal compressor unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical receivers:\u003c\/strong\u003e Take less floor space but require more ceiling height — better choice when floor space is the limiting factor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy 200 PSI vs. 175 PSI?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe 200 PSI MAWP rating of the 30GH200 is 25 PSI higher than the 30H175 version\u003c\/li\u003e\n\u003cli\u003eIf your compressor cuts out at 175 PSI or higher, you need a 200 PSI rated tank — using a 175 PSI tank above its MAWP is a safety violation\u003c\/li\u003e\n\u003cli\u003eMany modern two-stage compressors cut out at 175 PSI; some reach 200 PSI — always match the tank to the compressor cut-out pressure plus a safety margin\u003c\/li\u003e\n\u003cli\u003eThe 200 PSI rating also provides future flexibility if you upgrade your compressor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat a 30-Gallon Receiver Does for Your System\u003c\/h2\u003e\n\u003ch3\u003eSystem Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemand buffering:\u003c\/strong\u003e The tank stores compressed air during low-demand periods and releases it during peak demand — tools see consistent pressure instead of pressure drops when multiple users draw air simultaneously\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor cycle reduction:\u003c\/strong\u003e A properly sized receiver allows the compressor to run in longer, more efficient cycles rather than short-cycling frequently, which extends motor and pump life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture separation:\u003c\/strong\u003e Compressed air cools in the tank, causing moisture to condense and fall to the bottom — this moisture must be drained regularly via the tank drain valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure stabilization:\u003c\/strong\u003e Smooths out pressure pulsations from reciprocating pump action\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs 30 Gallons the Right Size for Your Shop?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 gallons works well for:\u003c\/strong\u003e Single technician shops, light-duty intermittent use (impact wrench, tire inflation, blow gun), or as an auxiliary buffer tank on a larger system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsider a larger tank if:\u003c\/strong\u003e You are running multiple tools simultaneously, doing body work with sanders and spray equipment, or running a high-duty cycle air system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral sizing guideline:\u003c\/strong\u003e 4-6 gallons of receiver per CFM of compressor output at minimum — a 5 CFM compressor works well with a 30-gallon tank; a 15 CFM compressor would benefit from an 80-gallon or larger receiver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation and Maintenance Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eASME certification:\u003c\/strong\u003e Confirm the tank is ASME coded and stamped if your jurisdiction requires it for pressurized vessels — contact us for certification status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety relief valve:\u003c\/strong\u003e A properly rated pressure relief valve must be installed on the receiver — confirm the valve rating matches the tank MAWP and compressor cut-out pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain valve:\u003c\/strong\u003e Drain condensate from the tank drain valve daily in humid conditions, or at minimum weekly — condensate left in the tank accelerates internal corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection:\u003c\/strong\u003e Inspect the tank exterior annually for corrosion, especially at the drain valve and port areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Castair 30-gallon horizontal air receiver tank, rated to 200 PSI\u003c\/li\u003e\n\u003cli\u003eNote: Safety relief valve, fittings, drain valve, and gauges may or may not be included — confirm with order. Most bare receivers ship without these accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 30GH200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 30 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Allowable Working Pressure (MAWP):\u003c\/strong\u003e 200 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Cast Air \/ Castair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e $924.08\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions and port sizes:\u003c\/strong\u003e Contact 866-217-0063 for confirmed specs — manufacturer page data not available at time of listing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Buy From OEM Diagnostic Tools?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialist since 2016\u003c\/strong\u003e in air compressor systems and major components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e on qualifying orders — we coordinate freight for large tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree tech support at 866-217-0063\u003c\/strong\u003e — call to confirm dimensions, port connections, and ASME certification status before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull manufacturer warranty\u003c\/strong\u003e on Cast Air receivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonest guidance:\u003c\/strong\u003e If the 30H175 (175 PSI version) is appropriate for your compressor, we will tell you — if you need 200 PSI, we will make sure you get the right tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCall 866-217-0063 for quick answers and help!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cast Air","offers":[{"title":"Default Title","offer_id":53342507466965,"sku":"30GH200","price":1704.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0622\/8466\/0949\/files\/Castair_Horizontal_Air_Receiver_9eb6b189-2e76-40c8-aaec-13cc8662c0e8.png?v=1772652520","url":"https:\/\/aircompressorfactorydirect.com\/products\/castair-30-gallon-horizontal-air-receiver-tank-200psi-30gh200","provider":"Air Compressor Factory Direct","version":"1.0","type":"link"}