{"product_id":"castair-10hp-3-phase-industrial-air-compressor-horizontal-tank-w-mounted-starter-i1033hc2-s","title":"Castair 10HP 3-Phase Industrial Air Compressor  Horizontal Tank w\/ Mounted Starter - I1033HC2-S","description":"\u003cp\u003eThe Castair I1033HC2-S is a 10-horsepower, 3-phase industrial air compressor on a 30-gallon horizontal tank with the C2 pump configuration and a factory-mounted magnetic motor starter. The 30-gallon tank makes this the most compact offering in the 10HP 3-phase horizontal line — built for installations where space is the primary constraint: service trucks, tight utility rooms, or supplemental compressor setups where a remote or secondary tank provides additional storage. Note that manufacturer specifications for this specific model were not publicly listed on the Castair product page at the time this description was written — contact us for confirmed specs before ordering.\u003c\/p\u003e\u003ch2\u003eWho Needs This Configuration\u003c\/h2\u003e\u003cp\u003eThe horizontal tank orientation keeps the height low — useful for installations under workbenches, in service vans, or in spaces with overhead constraints. The 10HP 3-phase motor requires a proper 3-phase electrical service, which limits this to commercial and industrial installations. The factory-mounted magnetic motor starter is included, so your electrician just needs to land the 3-phase power leads and the unit is ready to run.\u003c\/p\u003e\u003cp\u003eIf you need more air storage in the same HP range, look at the I1038HC2-S (80-gallon horizontal) or the I10312HC2-S (120-gallon horizontal). If you are on single-phase power, the comparable 10HP single-phase horizontal models are the I1018HC2-S (80-gallon) and I10112HC2-S (120-gallon).\u003c\/p\u003e\u003ch2\u003ePump Features — Castair Industrial C2 Configuration\u003c\/h2\u003e\u003cp\u003eThe C2 designation indicates a medium-frame cast iron pump. All Castair industrial pumps share these core features:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll cast iron construction\u003c\/strong\u003e — cylinders, heads, crankcase. Handles the heat and wear of continuous commercial service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow RPM design\u003c\/strong\u003e — Castair runs their industrial pumps from 420 to 995 RPM depending on configuration. Slower than typical compressor pumps, which means less heat, less wear, and longer service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTapered roller bearings at both ends of the crankshaft\u003c\/strong\u003e — correct bearing selection for the thrust loads of a reciprocating pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision steel connecting rods with automotive-type insert bearings\u003c\/strong\u003e — at crankshaft and wrist pin. Serviceable and replaceable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc and spring valves\u003c\/strong\u003e — reliable and field-serviceable without major disassembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-ring pistons\u003c\/strong\u003e — better sealing efficiency and less oil carry-over than 2-ring pistons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrifugal unloader\u003c\/strong\u003e — starts under no load every time, protecting the motor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTank and Motor\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-gallon horizontal ASME-certified tank\u003c\/strong\u003e — powder coated with channel base for floor or rack mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eASME safety valve\u003c\/strong\u003e — code-compliant and properly rated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1725 RPM industrial motor\u003c\/strong\u003e — 15% service factor minimum.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotally enclosed metal belt guard.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCopper discharge tube or stainless-steel braided flex line.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic motor starter included\u003c\/strong\u003e — factory mounted and wired.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e10HP 3-Phase Horizontal Tank Lineup\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eI1033HC2-S (this unit)\u003c\/strong\u003e — 10HP, 3-phase, 30-gallon horizontal, C2 pump, with starter. Most compact option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI1038HC2-S\u003c\/strong\u003e — 10HP, 3-phase, 80-gallon horizontal, C2 pump (758 RPM), 35.0 CFM @175 PSI, 64x20x46 in., 770 lbs, with starter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI10312HC2-S\u003c\/strong\u003e — 10HP, 3-phase, 120-gallon horizontal, C2 pump (758 RPM), 35.0 CFM @175 PSI, 69x24x50 in., 860 lbs, with starter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI10312HC3-S\u003c\/strong\u003e — 10HP, 3-phase, 120-gallon horizontal, C3 pump (570 RPM, larger\/slower), 35.0 CFM @175 PSI, 69x24x50 in., 1025 lbs, with starter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e I1033HC2-S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 10 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 3-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Capacity:\u003c\/strong\u003e 30 gallons, horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Configuration:\u003c\/strong\u003e C2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pressure:\u003c\/strong\u003e 175 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Speed:\u003c\/strong\u003e 1725 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Service Factor:\u003c\/strong\u003e 15% minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Certification:\u003c\/strong\u003e ASME\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Starter:\u003c\/strong\u003e Included (factory mounted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Detailed CFM, RPM, dimensions, and weight specifications not publicly listed by manufacturer for this model. Contact us for confirmed specifications before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Buy From Air Compressor Factory Direct?\u003c\/h3\u003e\u003cp\u003eWe have specialized in industrial air compressors since 2016. If you are unsure whether a 30-gallon tank is the right fit or whether you should step up to the 80-gallon horizontal, call us and we will walk through the application with you. Free shipping, free pre-sale technical support, and full manufacturer warranty on every unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCall 866-217-0063 for quick answers and help!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cast Air","offers":[{"title":"Default Title","offer_id":53342558453973,"sku":"I1033HC2-S","price":8656.32,"currency_code":"USD","in_stock":true}],"url":"https:\/\/aircompressorfactorydirect.com\/products\/castair-10hp-3-phase-industrial-air-compressor-horizontal-tank-w-mounted-starter-i1033hc2-s","provider":"Air Compressor Factory Direct","version":"1.0","type":"link"}