{"product_id":"castair-10-hp-1ph-rotary-screw-air-compressor-40-cfm-at-100-psi-80-gal-vert-tank-r1018vp75","title":"Castair 10 HP 1Ph Rotary Screw Air Compressor 40 Cfm At 100 Psi 80 Gal Vert Tank R1018VP75","description":"\u003cp\u003eThe Cast Air R1018VP75 is a 10 HP single-phase rotary screw air compressor built around an 80-gallon vertical tank, rated at 40 CFM at 100 PSI. It is the entry point in the Cast Air 10 HP rotary screw lineup — the most affordable of the four 10 HP configurations — and the right starting point for shops that need continuous-duty rotary screw performance, run on single-phase 230V power, and want to minimize floor space consumed by the compressor. The vertical tank keeps the footprint tight while the rotary screw design delivers consistent, steady air across a full production day.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotary Screw Technology:\u003c\/strong\u003e Oil-flooded rotary screw design provides continuous-duty air supply with steady pressure and minimal pulsation — a significant step up from piston compressors that heat air during each compression stroke and require duty cycle management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Phase Power — No 3-Phase Required:\u003c\/strong\u003e Operates on standard 230V single-phase service. This is the critical feature for shops that do not have three-phase electrical infrastructure and cannot justify the cost of a transformer or panel upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 CFM at 100 PSI:\u003c\/strong\u003e Rated free air delivery handles the simultaneous demand of standard shop tools, lifts, and spray equipment at normal working pressures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80-Gallon Vertical Tank:\u003c\/strong\u003e Compact footprint uses minimal floor space while providing sufficient receiver volume for most light-to-moderate shop applications. The vertical orientation is practical in tight compressor rooms and utility closets with available ceiling height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmallest Footprint in the Cast Air 10 HP Lineup:\u003c\/strong\u003e Among the four 10 HP configurations, the 80-gallon vertical tank occupies the least floor space — the right call when space is the primary constraint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Duty Rated:\u003c\/strong\u003e Designed for sustained operation through a full shift, unlike piston compressors that require cooling intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e R1018VP75\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 10 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhases:\u003c\/strong\u003e 1-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Air Delivery:\u003c\/strong\u003e 40 CFM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Pressure:\u003c\/strong\u003e 100 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Capacity:\u003c\/strong\u003e 80 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Orientation:\u003c\/strong\u003e Vertical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Type:\u003c\/strong\u003e Rotary screw (oil-flooded)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: Full manufacturer specification sheets were not available at time of writing. Specifications listed are confirmed from the product name and SKU. Contact us at 866-217-0063 for complete datasheet details before purchasing.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Compressor Handles\u003c\/h2\u003e\n\u003cp\u003e40 CFM at 100 PSI covers standard general-service shop demand:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle lifts\u003c\/strong\u003e — cycling two-post and four-post lifts in service bays with consistent pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-powered hand tools\u003c\/strong\u003e — impact wrenches, ratchets, air hammers, and grinders with sustained pressure under load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray painting and HVLP finishing\u003c\/strong\u003e — steady supply pressure for quality finish work without spikes or drops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire service\u003c\/strong\u003e — bead seating, inflation, and deflation in fleet or tire shop environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModerate simultaneous demand\u003c\/strong\u003e — the 80-gallon receiver handles multiple tools running at once in lighter-demand environments; heavy simultaneous use may cycle the compressor more often than a 120-gallon configuration would\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral shop pneumatics\u003c\/strong\u003e — blow guns, shop tools, and facility pneumatic equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere This Unit Fits in the Cast Air 10 HP Lineup\u003c\/h2\u003e\n\u003cp\u003eCast Air offers four 10 HP single-phase rotary screw configurations. Here is where the R1018VP75 sits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eR1018VP75 — $10,647.82\u003c\/strong\u003e (this unit): 80-gal vertical, 40 CFM @ 100 PSI. Smallest footprint, lowest price in the 10 HP lineup. Best for space-constrained shops with moderate demand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR1018HP75 — $11,103.63:\u003c\/strong\u003e 80-gal horizontal, 40 CFM @ 100 PSI. Same capacity and pressure as this unit, horizontal orientation for low-ceiling or high-traffic stability requirements. Costs $455.81 more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR10112HP75 — $11,448.47:\u003c\/strong\u003e 120-gal horizontal, 40 CFM @ 135 PSI. Higher pressure rating and larger receiver buffer. The right step up for shops with higher peak demand or tools that benefit from pressure above 100 PSI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR10112VP75 — $12,120.72:\u003c\/strong\u003e 120-gal vertical, 40 CFM @ 100 PSI. Largest receiver in a compact vertical footprint. Highest price in the lineup. For shops needing maximum buffer volume in minimum floor space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are running a single technician or light general service work, this unit covers it. If you run multiple bays simultaneously or need sustained high-demand output, step up to a 120-gallon configuration and call us to confirm the fit.\u003c\/p\u003e\n\n\u003ch2\u003eVertical vs. Horizontal Tank — Picking the Right Orientation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical (this unit)\u003c\/strong\u003e — smaller floor footprint, taller height. Right for shops with ceiling clearance and limited floor space. Slightly higher center of gravity, so it should be placed on a stable, level surface in a low-traffic area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal (R1018HP75)\u003c\/strong\u003e — larger floor area, lower profile. Better under low ceilings, more stable in busy areas, easier to move through doorways. Costs $455.81 more than this unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePricing and Availability\u003c\/h2\u003e\n\u003cp\u003eThe Cast Air R1018VP75 is priced at \u003cstrong\u003e$10,647.82\u003c\/strong\u003e — the most affordable entry point in the Cast Air 10 HP rotary screw lineup. Call for current availability and freight delivery coordination to your location.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy From OEM Diagnostic Tools?\u003c\/h2\u003e\n\u003cp\u003eWe have sold commercial shop equipment since 2016. We stock and support Cast Air compressors and will tell you straight which configuration fits your shop before you spend money, not after.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e on qualifying orders (freight equipment coordinated at time of sale)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree technical support\u003c\/strong\u003e — call 866-217-0063 with sizing questions before you buy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull manufacturer warranty\u003c\/strong\u003e — we handle warranty support and coordination, not you\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLineup guidance\u003c\/strong\u003e — if your workflow actually needs a 120-gallon unit, we will tell you now, not after you run into pressure recovery delays at peak shift\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCall 866-217-0063 for quick answers and help!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cast Air","offers":[{"title":"Default Title","offer_id":53342576541909,"sku":"R1018VP75","price":18959.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0622\/8466\/0949\/files\/Screw.airend_jpg_8f6356db-016c-4412-a1c4-06e24659f0c9.webp?v=1772652819","url":"https:\/\/aircompressorfactorydirect.com\/products\/castair-10-hp-1ph-rotary-screw-air-compressor-40-cfm-at-100-psi-80-gal-vert-tank-r1018vp75","provider":"Air Compressor Factory Direct","version":"1.0","type":"link"}